• The TBL Plate Clamp can also be used for transporting steel constructions and profiles.
• It is recommended to use a pair of plate clamps in conjunction with a spreader beam for large sized sheets and long materials which have a tendency to sag.
• The jaw can be opened and closed with the locking lever (except for the TBL 0.5 t which uses a positive springloaded cam).
• The safety lock overrides the spring-loaded cam, preventing the clamp from opening even when there is no load.
• This plate clamp is service-friendly, making it easy to exchange parts, which are available individually or in kits.
• Clamp repair is available by the factory, or can be done by certified and experienced staff.
• The TBL Plate Clamp 0.5 is equipped with a safety lock (positive spring-loaded cam), but comes without locking lever.

INFO:

• The surface hardness of the material must not exceed HRC 30/Brinell 300.
• The min. load is 10% of the nominal WLL, except for model TBL 1,5 plus, the min. load here is 100 kg.